Easily Root your LG G2 Kitkat & Android 5.0 Lollipop (All Variants)
Devices confirmed working with this method
- LG G3 (all variants)
- LG G3 Beat
- LG G2
- LG G2 Mini
- LG G Pro 2
- LG G Pad
- LG F60
- LG L90
- LG Tribute
- LG Spirit
- LG Volt
- LG G Vista
Rooting LG G2 running Android 5.0.2 or KitKat with LG One Click Root Script
3. Enable USB debugging on your phone. (Go to Settings > General > About phone > Software information, tap Build number seven times and then go to Settings > Developer options and turn on USB debugging)
4. Connect the phone to computer via USB cable and select MTP as USB Mode.
To confirm your device is connected over ADB interface, open ‘Device manager’ and it should show your phone as an Android device.
5. Run LG One Click Root tool and select ‘Start‘.
When it says ‘Waiting for device…’, get back to phone home screen and select OK for ‘Allow USB debugging?’ prompt as shown.
The phone will reboot at 45% and after rebooting when it says ‘Looking for LG serial port’, go to home screen again and select OK to Allow USB debugging.
6. The device will now reboot into ‘Download mode‘ (Firmware Update).
NOTE: For some reason or bug, the tool sometime got stuck at 90% on computer and 0% on firmware update screen on phone and this happened couple of times. To get through this error, just restart the phone by long pressing power key while it’s connected to the computer and process is stuck at 90%. It should then show 100% and Done
After reboot, look for the SuperSU app in Menu which should be installed on your Device. If SuperSU is not installed, then just do the whole one-click root Method again it should work.Some times its Failed couple of Time But it will work .
